Description
The Naze32 Full Flight Controller Rev 6
Now shipping revision 6C
This is an amazing flight controller for a multi rotor. It features a barometer and compass which is a step up from the acro version. This Flight controller is an amazing one and it will help you build the ultimate Quadcopter.
Naze32 rev 6 user manual example
DETAILS
- STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
- Invensense MPU6500 MEMS accelerometer + gyro
- BMP280 Barometer
- Built-in Micro-USB for programming/firmware update
- 36x36mm size, ~5 gram weight w/o headers
- Made in JAPAN
- Shipping with 16V input capable voltage regulators
These come with pin headers (straight and right angle options), NOT soldered to the board.
Naze32 rev6 Features:
- USB on right side
- PPM/PWM input as through-hole
- 3.3V, I2C on standard-size headers
- Fully pinout compatible with rev5 accessories (OSDoge etc)
- SBUS Inverter
- Spectrum satellite
- MPU6500
- Sonar pads w/resistors added for direct connection to 5V sonar
- All extra pads (FT, GP, A5) on top, only sonar on bottom
- BMP280 barometer
- 16mbit flash
Specs
- 36×36 mm (30.5mm Mounting)
- 5.3 grams (no headers, 7.3 grams with)
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
- STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
- Invensense MPU6500 MEMS accelerometer + gyro
- Built-in Micro-USB for programming/firmware update
- 36x36mm size, ~5 gram weight w/o headers
- Made in JAPAN
- Shipping with 16V input capable voltage regulators
These come with pin headers (straight and right angle options), NOT soldered to the board.
INCLUDED
- Acro Naze32 rev6 – Open Box with Pre Soldered Pin Configuration
Configuration software – Chrome Baseflight Configurator (preferred) https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk
NOTE: To ensure driver compatibility, please connect the board via USB before soldering any pins to the board. A good source for drivers that seem to be compatible with the software are Silicon Labs CP210x USB to UART Bridge VCP Drivers, which can be found HERE
NOTE: RETURNS CANNOT BE ACCEPTED FOR POOR SOLDERING AND BAD CONNECTIONS.
Notice: NAZE boards can vary in color from batch to batch. We cannot guarantee which color you will receive.
- Manual links will be available to you via download upon purchase via your account https://quadquestions.com/my-account/
- The user manual for non-registered owners can be found here
- Configuration software found HERE. (Chrome)
- USB Configuration cable found HERE
HOW TO TEST AND SOLDER YOUR BOARD:
https://youtu.be/9jHQ8Rl5o7w
Reviews
There are no reviews yet.