Description
Details
Now shipping version 6C
This is the ACRO version, For the full version, click here We love the new Rev6 changes. These include:
- Changed the side serial pins to through holes, no more ripped pads during crashes!
- Added support and connection for specktrum radios
- added larger Memory (16mb) for blackbox (included on Acro!)
- SBUS converter (for newer Serial Rx such as the FrSky X4R)
- New voltage regulator can handle input voltage of up to 16V~ no more fried boards or BEC required
- Direct Sonar Connection
- I2C now on actual through hole connection
- right side USB connection.
- 16mbit on board memory on acro boards
- BMP280 barometer on acro boards
The acro version omits the compass and barometer which is not typically used on small acrobatic quadcopter. For the full version with compass and barometer, see the full version of the Naze32 here.
THERE IS NO WARRANTY OFFERED BECAUSE OF ISSUES WITH FIRMWARE OTHER THAN BASEFLIGHT- THE OFFICIAL SOFTWARE FOR THE BOARD (BASEFLIGHT) CAN BE DOWNLOADED HERE
Naze32 rev 6 user manual example
Details
- STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
- Invensense MPU6500 MEMS accelerometer + gyro
- Built-in Micro-USB for programming/firmware update
- 36x36mm size, ~5 gram weight w/o headers
- Made in JAPAN
- Shipping with 16V input capable voltage regulators
These come with pin headers (straight and right angle options), NOT soldered to the board.
Naze32 rev6 C Features:
- USB on right side
- PPM/PWM input as through-hole
- 3.3V, I2C on standard-size headers
- Fully pinout compatible with rev5 accessories (OSDoge etc)
- SBUS Inverter
- Spectrum satellite
- bmp280 barometer
- MPU6500
- Sonar pads w/resistors added for direct connection to 5V sonar
- All extra pads (FT, GP, A5) on top, only sonar on bottom
- 16mbit flash
Specs
- 36×36 mm (30.5mm Mounting)
- 5.3 grams (no headers, 7.3 grams with)
- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
Included
- Acro Naze32 rev6 C – Presoldered- random Configuration
Configuration software – Chrome Baseflight Configurator (preferred) https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk Download User’s Manual.
NOTE: To ensure driver compatibility, please connect the board via USB before soldering any pins to the board. A good source for drivers that seem to be compatible with the software are Silicon Labs CP210x USB to UART Bridge VCP Drivers, which can be found HERE
NOTE: Returns cannot be accepted for poor soldering and bad connections.
Notice: NAZE boards can vary in color from batch to batch. We cannot guarantee which color you will receive.
- User manual found HERE.
- Manual links will be available to you via download upon purchase via your account https://quadquestions.com/my-account/
- Configuration software found HERE. (Chrome)
- USB Configuration cable found HERE
How to test and solder your board:
https://youtu.be/9jHQ8Rl5o7w
Reviews
There are no reviews yet.