- 180mm diagonal motor to motor layout
- 3K 45mm weave Carbon fiber design
- Frame Mounted Xt-60 connector
- Vtx antenna mounting location.
- multiple motor mounting options
- Center mounted battery
- Angle adjustable FPV camera hanger.
- includes 5-in-1 PDB with included BEC, Lost model alarm, Low voltage alarm and LED Light controller.
- includes 3d printed Hoop style landing gear, can be upgraded to Nylon Sparrow Claws if desired.
The FPV camera holder can install up to 32mm board mounted camera
We have worked hard to design a frame that is not like other traditional frames, but is as light as possible. The result:
Weight of complete airframe with Stainless hardware and nylon risers: 124.4g
DURABLE LANDING GEAR
The kit includes 3 3D printed landing gear- This means that the Sparrow Knight is ready for hard landings and scraping across the pavement. If you want to upgrade the landing gear to Sparrow Claws, you can they fit the Sparrow Knight perfectly!
DURABLE REPLACEABLE FRONT BUMPER
The Sparrow Knight also keeps the front camera well protected with a durable front bumper.
Strong 45 degree 3k carbon
The Sparrow line of quadcopters use a 45 degree weave carbon fiber pattern. Although more expensive, this carbon is the best to make odd shapes out of such as quadcopters. Our Sparrows are TOUGH!
Center Mounted Battery
Center mounted battery location for better CG than other designs.
Multiple Motor Mounting Options
The knight mounts most popular motor choices for mini quads from 1806 all the way up to 2208 sizes.
Ready for FPV video transmitters
The frame has provisions for a female SMA connector to be mounted to the frame such as the one on the popular Hawkeye 200mw Vtx
Adjustable camera angle
Frame mounted XT-60 battery connector
Keep your battery leads out of your props!! The sparrow knight follows the Sparrow Tradition by providing you with a frame mounted XT-60 connector.
Full Featured Frame Kit
The Sparrow Knight frame kit includes:
- 5-in-1 PDB board,
- xt-60 connector,
- Rubberized battery strap
- 3d printed landing gear
- stainless hardware
- 3d printed FPV Camera hanger
Motors: Lumenier 1806 2300kv
Props: HQ Prop 4045
Camera: Runcam Sky
Video Transmitter: Hawkeye 200mw
Antenna: QQ Cloverleaf
Radio System: FrSky Taranis
Goggles: Fatshark Dominator V3s