Description
Features:
- 180mm diagonal motor to motor layout
- 3K 45mm weave Carbon fiber design
- Frame Mounted Xt-60 connector
- Vtx antenna mounting location.
- multiple motor mounting options
- Center mounted battery
- Angle adjustable FPV camera hanger.
- includes 5-in-1 PDB with included BEC, Lost model alarm, Low voltage alarm and LED Light controller.
- includes 3d printed Hoop style landing gear, can be upgraded to Nylon Sparrow Claws if desired.
The FPV camera holder can install up to 32mm board mounted camera
Weight
We have worked hard to design a frame that is not like other traditional frames, but is as light as possible. The result:
Weight of complete airframe with Stainless hardware and nylon risers: 124.4g
DURABLE LANDING GEAR
The kit includes 3 3D printed landing gear- This means that the Sparrow Knight is ready for hard landings and scraping across the pavement. If you want to upgrade the landing gear to Sparrow Claws, you can they fit the Sparrow Knight perfectly!
DURABLE REPLACEABLE FRONT BUMPER
The Sparrow Knight also keeps the front camera well protected with a durable front bumper.
Strong 45 degree 3k carbon
The Sparrow line of quadcopters use a 45 degree weave carbon fiber pattern. Although more expensive, this carbon is the best to make odd shapes out of such as quadcopters. Our Sparrows are TOUGH!
Center Mounted Battery
Center mounted battery location for better CG than other designs.
Multiple Motor Mounting Options
The knight mounts most popular motor choices for mini quads from 1806 all the way up to 2208 sizes.
Ready for FPV video transmitters
The frame has provisions for a female SMA connector to be mounted to the frame such as the one on the popular Hawkeye 200mw Vtx
Adjustable camera angle
The Sparrow Knight features an angle-adjustable FPV camera mount that can fit up to a 36mm board mount camera such as the Sony Superhad CCD. It is made to fit with the RunCam Sky camera.
Frame mounted XT-60 battery connector
Keep your battery leads out of your props!! The sparrow knight follows the Sparrow Tradition by providing you with a frame mounted XT-60 connector.
Full Featured Frame Kit
The Sparrow Knight frame kit includes:
- 5-in-1 PDB board,
- xt-60 connector,
- Rubberized battery strap
- 3d printed landing gear
- stainless hardware
- 3d printed FPV Camera hanger
Build Photos
Recommended Equipment
Motors: Lumenier 1806 2300kv
ESCs: BLheli SN20s or Kiss 12A
Flight Controller: Naze32 Acro
Props: HQ Prop 4045
Camera: Runcam Sky
Video Transmitter: Hawkeye 200mw
Antenna: QQ Cloverleaf
Radio System: FrSky Taranis
Goggles: Fatshark Dominator V3s
video receiver: TBS Dominator Receiver
c4pnk1rk –
Knight v2 All built up!
c4pnk1rk –
Knight v2