Hey, I was just wondering if you could help me out. I just ordered a new F3 femto flight controller from emax-USA, because I had to replace a bad one. This flight controller is being used with the emax micro power pack for a flite test gremlin. I went through the whole process of flashing new firmware through betaflight on the flight controller. I got everything soldered up and I then went to the motors tab to calibrate the ESCs. I unplugged the battery and disconnect from betaflight, I then reconnected and went back to the motors tab to check motor direction. Motors 1, 2, and 4 spun up fine. Motor # 3 didn’t spin up at all. So I then went through the process of testing, motors and ESCs. I took the working motor and ESC from motor #2 and swapped it with #3. Motor #3 still didn’t work, but the motor and ESC from #3 worked fine on motor #2. Any ideas? Thank you for the help!
Hi, we recommend a Taranis X9D Plus radio system with an X4R-SB receiver. We should have some radios in stock in the next week or so. As for goggles, we recommend the Fatshark HD V2 or V3 or the Dominator goggles. Let me know if that helps to answer your questions.
Josh Lueck
I’m interested in the qq190 and need to know the recommended radio to use and a good focus set of goggles to use
Donny
Hey, I was just wondering if you could help me out. I just ordered a new F3 femto flight controller from emax-USA, because I had to replace a bad one. This flight controller is being used with the emax micro power pack for a flite test gremlin. I went through the whole process of flashing new firmware through betaflight on the flight controller. I got everything soldered up and I then went to the motors tab to calibrate the ESCs. I unplugged the battery and disconnect from betaflight, I then reconnected and went back to the motors tab to check motor direction. Motors 1, 2, and 4 spun up fine. Motor # 3 didn’t spin up at all. So I then went through the process of testing, motors and ESCs. I took the working motor and ESC from motor #2 and swapped it with #3. Motor #3 still didn’t work, but the motor and ESC from #3 worked fine on motor #2. Any ideas? Thank you for the help!
Josh Lueck
Need information on your qq190 what radio or ground station do you recommend and for goggles
Anthony Jacobs
Hi, we recommend a Taranis X9D Plus radio system with an X4R-SB receiver. We should have some radios in stock in the next week or so. As for goggles, we recommend the Fatshark HD V2 or V3 or the Dominator goggles. Let me know if that helps to answer your questions.
Josh Lueck
I’m interested in the qq190 and need to know the recommended radio to use and a good focus set of goggles to use
Anthony Jacobs
Test test activate.
Link sent.
https://quadquestions.com/activate/?key=9dbea9a642b89ef2