Wraith32 is a 32bit BLHELI ESC that uses the latest BLheli_32 firmware. The Wraith32 ESC supports Dshot up to Dshot1200, and rates up to 32kHz is supported. These ESCs are small, powerful, blheli_32 capable 32bit ESCs. The Wraith32 ESCs are rated to 35A and capable of handling almost anything you can throw at them.
The Wraith32 ESC runs in conjunction with an ARM 32bit compatible MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band, is capable of both voltage and current monitoring and limiting, as well as offering customization of the brake on stop force. Unlike current ESCs, the Wraith32 ESC has A LOT of room to grow and wide compatibility range with future products.
One of the nicest features with the Wraith32 35A ESC is the auto timing feature, which (essentially) is designed to offer the pilot the smoothest and most efficient flight experience available, which is a freestyle pilots dream come true!
- 32bit Compatible ESC (Blheli_32)
- Dshot1200 up to 32kHz
- Incredibly small size
- Very low weight
- Auto Timing Feature
- On-Board RGB LED
- Build in Current sensor
- Smooth Response
- Compatible with the BetaflightF3 Flight Controller
- 2-6s Lipo input
- 35A designed
- Compatible to BetaflightF3 Flight Controller
- Size: 15*30mm
- Packaging: One ESC each PP bag with Wraith32 lable.
BLHeli_32 is the 3rd generation of BLHeli firmware, superseding BLHeli and BLHeli_S. BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.
Why increased MSU speed is amazing
- It can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.
- It allows for more functionality.
– Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
– Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
– Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.
– Like programmable brake on stop force. Which allows control of the braking of fixed wing props.
– Like improved direction change in bidirectional mode.
– Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.
- BLHeli_32 ESC Firmware Overview
- What is Dshot1200 and Why Dshot1200 is Better?
- How to Get Dshot1200 Running in Betaflight?