Sale!
 
(1 customer review)

Naze32 Full Featured Flight Controller with Compass & Barometer Rev 6 (6C)

$54.99 $44.99

This is an amazing flight controller for a multi rotor.  It features a barometer and compass which is a step up from the acro version.  You should use this flight controller if you want to use GPS options such as return to home, hold, speed indication via telemetry or OSD, And Coordinates, RTH arrow, heading and altitude information in an On Screen Display.

If you are flying acro and don’t care to know all of that other cool information, go with an acro board instead.

Out of stock

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: NAZE32FULLQQ Category: Tags: , , Brand:
 

Description

The Naze32 Full Flight Controller Rev 6

Now shipping revision 6C

This is an amazing flight controller for a multi rotor.  It features a barometer and compass which is a step up from the acro version.  This Flight controller is an amazing one and it will help you build the ultimate Quadcopter.

 

Naze32 rev 6 user manual example

Naze32 rev 6 user manual example

 

 

Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 Acro rev6 flight controller is extremely simple to setup, with configuration based on the familiar “MultiWii” software.

DETAILS

The newest version, rev6, of the popular Acro Naze32 flight controller board by AbuseMark.

At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.

This “Full” version is the same as the acro Naze32 board except the full version comes with the MS5611 barometer and a magnetometer.

  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6500 MEMS accelerometer + gyro
  • BMP280 Barometer
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, ~5 gram weight w/o headers
  • Made in JAPAN
  • Shipping with 16V input capable voltage regulators

These come with pin headers (straight and right angle options), NOT soldered to the board.

Naze32 rev6 Features:

  • USB on right side
  • PPM/PWM input as through-hole
  • 3.3V, I2C on standard-size headers
  • Fully pinout compatible with rev5 accessories (OSDoge etc)
  • SBUS Inverter
  • Spectrum satellite
  • MPU6500
  • Sonar pads w/resistors added for direct connection to 5V sonar
  • All extra pads (FT, GP, A5) on top, only sonar on bottom
  • BMP280 barometer
  • 16mbit flash

Specs

  • 36×36 mm (30.5mm Mounting)
  • 5.3 grams (no headers, 7.3 grams with)
  • 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
  • Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6500 MEMS accelerometer + gyro
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, ~5 gram weight w/o headers
  • Made in JAPAN
  • Shipping with 16V input capable voltage regulators

These come with pin headers (straight and right angle options), NOT soldered to the board.

INCLUDED

  • Acro Naze32 rev6
  • 2×5 pin header
  • 3×6 pin header (right angle)
  • 1×10 pin header

Configuration software – Chrome Baseflight Configurator (preferred)

https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

 THESE BOARDS COME WITHOUT THE PINS SOLDERED. IF YOU NEED THE SOLDERING SERVICE, WE CAN DO IT FOR YOU.  IF YOU HAVE ANY DOUBTS ABOUT YOUR SOLDERING SKILLS, PLEASE SAVE YOURSELF THE TROUBLE:

NAZE32 SOLDERING SERVICE

NOTE: To ensure driver compatibility, please connect the board via USB before soldering any pins to the board. A good source for drivers that seem to be compatible with the software are Silicon Labs CP210x USB to UART Bridge VCP Drivers, which can be found HERE

NOTE: RETURNS CANNOT BE ACCEPTED FOR POOR SOLDERING AND BAD CONNECTIONS.

Notice: NAZE boards can vary in color from batch to batch. We cannot guarantee which color you will receive.

  • Manual links will be available to you via download upon purchase via your account https://quadquestions.com/my-account/
  • The user manual for non-registered owners can be found here
  • Configuration software found HERE. (Chrome)
  • USB Configuration cable found HERE

HOW TO TEST AND SOLDER YOUR BOARD:

 

Additional information

Weight 0.1 lbs
Dimensions 2 × 2 × 1 in

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

What others are saying

  1. Joe

    Joe (verified owner)

    Exactly as expected and received it promptly. Ordered the soldering service and had my quad back up and flying within an hour of opening the package. Connected right up to cleanflight for a firmware update and I had no trouble configuring the board. Thanks!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Question

    viktar

    Hi,
    Can I connect sbus futaba receiver and a GPS at the same time?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

You may also like…