5.8GHz 32 channel long range fpv video transmitter 500mw TS58500

$69.99

This is a great little 500MW Video transmitter for Long Range FPV flight on 5.8Ghz.

You have to use a good antenna system to make this work well for long range.  I recommend a cloverleaf antenna on the transmitter, and a patch antenna or other directional antenna on your goggles.

This system gets decent range running a 5.8Ghz Skew Planar antenna on the receiver as well.

This transmits fatshark and bosom frequencies which is really nice!  See the frequency chart below to make sure that your frequency is on there.

Out of stock

Sold Out

SKU: 583clrfvt5T Category: Tags: , , , Brand:
 

Description

Details

The TS58500 5.8GHz 32 channel long range fpv video transmitter 500mw transmitter packs 500mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter! A must for those looking save size and weight while still getting good performance. The TS58500 is transmitting a full range of 32 channels and only weighs 10g. It’s perfect for a wide range of aircraft!

Features

  • 32 channels: Cover A, B, E bands and F bands (fatshark and bosom frequencies.)
  • Small sized and light weight
  • Transmitter frequency: 5645-5945MHz with 500mW power output
  • Transmitting distance > ~3000m (open area)
  • Female SMA Antenna connector (please refer to the chart below to make sure that your antenna fits, or get an adapter.

TX TS58500 specs:

  • Operating Voltage 7 – 24V
  • Supply current 220 mA
  • Operating Temperature -10 +85 ℃
  • Video Band Width 0 8.0 MHz
  • Audio carrier Frequency 6.5 MHz
  • Video Input Level 0.8 1.0 1.2 Vp-p
  • Video Input Impedance 75 Ohm
  • Audio Input Level 0.5 2.0 Vp-p
  • Audio Input Impedance 10K Ohm
  • Weight 7g
  • Antenna Connector Female SMA Connector (Adapters here)
  • A Guide to FPV SMA & RPSMA Connector ends

    A Guide to FPV SMA & RPSMA Connector ends

  • Dimensions (L x W x H) 42x23x8mm
  • Video Format NTSC/PAL
  • Output Impedance 50 Ohm
  • Output Power 26 26.5 27 dBm

Frequency and channel frequency table:

Frequency Table

Compatible with Fatshark, ImmersionRC Boscam, Foxtech and other generic branded FPV receivers within the same frequency range.

Included

  • 1 x Transmitting unit (TX)
  • 1 x Antennas (2db)
  • 1x GoPro USB video out / power cable
  • 1 x 5p cable extension
  • 1x 5p cable for connecting to custom camera
  • 1 x User manual

*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.

Additional Information

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a “HAM” amateur radio license. Learn more about HAM licensesIt is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Quadquestions.com cannot be held responsible for your actions if you purchase and/or use this product in violation of your government’s regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Additional information

Weight 0.1 lbs
Dimensions 6 × 6 × 2 in

Reviews

There are no reviews yet.

Be the first to review “5.8GHz 32 channel long range fpv video transmitter 500mw TS58500”

Your email address will not be published. Required fields are marked *