Holybro Rice32 Micro F3 Racing Flight Controller in case
Holybro Rice32 Micro F3 Racing Flight Controller in case side
Holybro Rice32 Micro F3 Racing Flight Controller in case
Holybro Rice32 Micro F3 Racing Flight Controller in case
Holybro Rice32 Micro F3 Racing Flight Controller all components
Holybro Rice32 Micro F3 Racing Flight Controller in package
Holybro Rice32 Micro F3 Racing Flight Controller size comparison
Holybro Rice32 Micro F3 Racing Flight Controller bare board
Holybro Rice32 Micro F3 Racing Flight Controller stm32 closeup
Holybro Rice32 Micro F3 Racing Flight Controller bare board side
Holybro Rice32 Micro F3 Racing Flight Controller size comparison 2
 

Holybro Rice32 F3 Micro Racing Flight Controller

$49.99

We’ve been testing these Holybro Rice flight controllers and we are pleased to finally bring them to our customers.  These are similar to the popular Naze32 Afromini yet they sport an F3 processor for some serious floating point number crunching and I/O galore..  They feature lots of IO, JST connectors for easy wiring, a 4 layer board, a barometer for altitude measurements, and connectivity with Cleanflight.  These boards fly well and the construction is decent. Case included!

This is a full featured F3 flight controller in half the package of a normal one.

Out of stock

Sold Out

SKU: HBRice32 Category: Tags: , , , Brand:
 

Description

Details

Tiny space saving design-full capabilities in a package half the size and half the weight. Protective case – comes with custom case for protection as well as easy installation.  Black box flight log recorder – high capacity on-board storage for easy tuning optimization, flight replay, and troubleshooting.Next-generation STM32 F3 processor with faster ARM-Cortex M4 core with floating point hardware unit for efficient flight calculations. Loop times are up to twice as fast as previous-generation STM32F1 based boards.

All plugs are located on the same side of the board for a more space-efficient design.6 PWM 3Pin though-holes connectors for ESCs, Servos. Full support for OneShot ESCs.Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. Built-in inverters.Dedicated output for programmable LEDs.Battery monitoring ports for voltage.

Buzzer port for warnings and notifications. Barometer mounted on the bottom of the board for easy wind isolation.Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.

Download the Manual Here

Features

  • 30x18mm board
  • STM32F303 CPU with FPU 256kB flash
  • 8MB (64Mbit) High-Capacity Flash
  • MPU6050 accelerometer/gyro
  • MS5611 barometer (Deluxe only)
  • HMC5983 magnetometer (Compass Sensor, Deluxe only)
  • 4x 4pin JST-SH sockets (UART1/OSD,UART2/GPS,UART3/ SERIAL RX,I2C)
  • 5x 1pin though-holes for pin headers for VBAT,LED,Buzzer
  • 6x 3pin though-holes for pin headers for ESC/Servo connections
  • 1x 3pin though-holes for pin headers for PPM RC input
  • 1x 3pin JST-ZH sockets (sat.DSM)
  • 5 grams

Includes

  • 1x Rice32
  • 1x 2.54 3P cable
  • 5x 2.54 1P cable
  • 4x 4pin cable
  • 1x CP2105

Instructions

1.) Jump the bootloader pad. Check the following options: “no reboot sequences” “flash on connect” “full chip erase”. Set manual baud rate: 25600. Click “load firmware button” in lower right corner. Then click Flash Firmware button next to it.
2.) Unplug the board from the USB connector
3.) Remove bootloader jumper. Plug board back in. All settings off except “Manual Baud rate: 25600”. Flash SP Racing F3 firmware.
Note: Use UART1 for USB plug. Use full 5V usb port on computer.jumperholybro

Additional information

Weight .3 lbs
Dimensions 4 × 4 × 1 in

Reviews

There are no reviews yet.

Be the first to review “Holybro Rice32 F3 Micro Racing Flight Controller”

Your email address will not be published. Required fields are marked *

You may also like…

Related products