DTF UHF 1W Long Range Receiver

$70.95

The DTF UHF 1W long range receiver is perfect for long range aircraft with Telemetry.  Most other receivers can receive at long range when you use a 1W transmitter, but the problem is that they typically only have a small transmitter (100mw) so you will loose your telemetry long before you loose your control signal.

The DTF UHF 1W Long range receiver fixes the issue by transmitting telemetry at a 1w power level, so you can kiss your telemetry woes goodbye.

The module also runs openers software, which will allow you to program it wirelessly from the transmitter.

This module can accept a 2-3s input.  It will not run on the typical 5V from a Bec that other receivers can use because of it’s power output.

If using this module on a 4S system, you will have to use a step down voltage regulator to make it work.

Out of stock

Sold Out

SKU: DTUH1WLORARE Category: Tags: , Brand:
 

Description

DTF UHF 1W long range receiver

  • Lowpass input filter to reduce out-of-band interference
  • Input voltage is 2-3S
  • PPM output up to 16 channels (enable in menu)
  • RSSI output, digital (enable in menu) (can be turned into 3.3v analogue with a solder jumper)
  • Completely user-settable frequency selections: 413MHz up to 453MHz
  • Up to 24 hopping channels, user-settable
  • Custom pin mapping
  • Adjust settings and bind wirelessly, without digging it out of your aircraft
  • Can also be used as a transmitter
  • RFM23BP tranceiver module including Si4432 chip with configurable 0-1000mW output, Frequency hopping capability and hundreds features.
  •  (49x28mm) board size
  • around 15 grams with SMA connector and servo pins.

Visit OpenLRSNG.com for more info.

Additional information

Weight 0.1 lbs
Dimensions 2 × 2 × 1 in

Reviews

There are no reviews yet.

Be the first to review “DTF UHF 1W Long Range Receiver”

Your email address will not be published. Required fields are marked *