Turnigy Accucel-6 80W 10A quadcopter battery charger

$39.99$99.99

This Turnigy Charger is an amazing value and it works great!  Use it to charge LiPO batteries, Nicd batteries and more.  This charger charges, discharges, balances, and more!

This charger can effectively charge up to 6 6S batteries at 6Amps.  ( to charge at 6 amps, you will need to make sure that your supply voltage gives 6 amps.)

Couple this with the parallel charging board to charge up 4 QAV250 1300 MAH batteries in roughly an hour.

Use the charger for charging in the field, as it runs off of a car battery or other 10-15v source.

If you want a charger that plugs into the wall instead of to a car battery, choose the B6AC

Out of stock
SKU: TA681qbc Categories: , Tags: , , Brand:
 

Description

The Turnigy Accucel 6 Balance Charger utilises quality FET’s and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, Nicd and Lead Acid batteries.
If you are looking for a charger for your Bolt batteries this unit is perfect as a low cost, go anywhere solution. The Accucel-6 will handle LiHV/LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately. And because this is a 12v DC charger you can power it up at the field using a 12v car battery or at home with a 12v power supply.
It is also able to connect this charger to your PC using a USB cable (not supplied) so you can monitor pack voltage, cell voltage and other data through real-time graphs during charging. You can also control charging and update firmware from “Charge Master”.
Also included with the Accucel-6 are input and output wires with XT60 plugs.

 

Features:

Microprocessor controlled

• Individual cell balancing
• LiHV, Li-ion, LiPoly and LiFe capable
• Ni-Cd and NiMH capable
• Delta-peak sensitivity (NiMH/NiCd)
• Lead Acid capable
• Large range of charge currents
• Terminal Voltage Control (TVC)
• Lipo Battery Meter
• Battery Internal Resistance Meter
• Store function, allows safe storage current
• Time limit function
• Temerature Cut-off (20-80 degree Celcius/68-176 Fahrenheit)
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 10 packs in memory)
• Battery break in and cycling. (1-5 cycles)

Specs:
Input Voltage: 11~18v
Circuit Power: Max Charge: 80W / Max Discharge: 10W
Charge Current Range: .1~10.0A
Balance Cells: 2-6 cells
NiMH/NiCd Cells: 1~15
LiHVLiIon/LiPoly Cells: 1~6
Pb battery Voltage: 2~20v
Weight: 270g

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, TURNIGY and any pack with a JST-XH adapter.

Includes:
1. Accucell 6 80W Charger
2. XT60 with Banana connector Charging Cable (430mm)
3. XT60 with Banana connector Charging Cable (300mm)
4. XT60 with Alligator Clip Charging Cable

Note: Power supply, power source cable, thermo sensor and USB cable are not included.

Additional information

Weight 0.3 lbs
Dimensions 6.5 × 6 × 1.5 in
Power Supply

No Power Supply, 7A DC power supply, 10A DC power supply

Reviews

There are no reviews yet.

Be the first to review “Turnigy Accucel-6 80W 10A quadcopter battery charger”

Your email address will not be published. Required fields are marked *